Product Description
Product Description
Rawhide Pet Bone Pressing Machine with ISO9001 is type of Flour Column and Three Board, the upmost output tonnage is 20t.
It can be adjusted amon the range of 5t-20t according to the different products’procedures, the purpose is to arrive the best required output. Cylinder Stroke is 200mm, (slide stroke is 200mm).
And the dimension of effective working surface is 500mm*400mm, the close height is 200mm. Well, our DR-20T Pressing Machine has two types, manual operation and automatic operation, meanwhile, it can count and timing automatically, safe and protective.
In addition, our DR-20T Pressing Machine’s middle plate and lower plate open two-article T-slot respectively, the pressure system is rear-mounted and the below equips with horizontal floor mat.
Features
Rawhide pressed bones making machine could produce pet chewing bone with cowhide, pigskin or sheepskin as material. It could press the material to be various shapes and sizes.
Machine Picture
Technical Parameters
| Project | DR-20T |
| Liquid Pressure of Work (MPa) | 14-21 |
|
Theory Output (Ton) | 5-20 |
|
Working surface size (mm) | Left and Right 500 |
| |
| Working surface size (mm) | |
| Front and Back 400 |
| Height of Working Table Off the Ground(MM) | 780 |
| Biggest Operational Height(mm) | 400 |
| Close(mm) | 200 |
|
Cylinder Stroke(mm) | 200 |
| Motor Power | 5.5KW |
| Structural Style | Flour Column Three Board |
| | Above Oil Cylinder |
|
Power source | 380VAC,50/60Hz |
| Weight | 1108kg |
| Dimension | 600*500*1780mm |
Sample Picture
Certificate
Packing and shiping
Customer visit
Exhibition
Factory & Office
Commissioning Service
1. We make accurate factory layout design according to customer’s factory size; if the customer needed, we could make workshop design with electricity power, water supply, gas power, material storage, final storages, worker’s restroom, etc.
2. After delivering machines to client’s factory, we start to apply for the Visa to client’s country immediately; normally the vessel needs 20-60 days to the required port, so we have enough time to get the Visa. While the machines arrives your factory, our engineers are ready to start for the commissioning service.
3. 1-2 of our engineers will go to your factory to install and adjust the processing line to realize normal production at shortest time.
4. Our engineers have responsibility to train and teach the workers how to operate, clean, maintain and repair all the machines, until the workers could well operate the processing line.
5. It normally costs 10 days for the commissioning
service, and we supply 1 year guarantee from the date of completion of commissioning service.
6. The engineer’s round-trip flight tickets, accommodation and daily salary USD 60 are on client’s account.
Product Tags:
|
|
208V 60HZ 3Phase Hydraulic Type Rawhide Dog Chews Dog Bone Making Machine Pressing Machine Images
|
